Winnerpak’s N Series display set is a high-end, understated jewelry presentation system made for contemporary shop displays. This pink microfiber jewelry display set’s fully modular design and small 450 × 420 mm footprint make it ideal for showcasing watches, bracelets, necklaces, earrings, and rings in boutiques, luxury jewelry stores, and showrooms.
The main characteristics are: – Recessed low-height design; overall base size: 450 × 420 mm
A silky pink microfiber suede is wrapped around an MDF core. Designed for countertop jewelry displays, glass showcases, and window displays, modular components are repositionable or replaceable.
Modules & Display Layout: Front Row-Ring Displays
The base’s front is lined with two 4×2 ring display trays. With a total capacity of 16 rings, each tray (about 206 × 100 mm) can accommodate 8 rings. The recessed design maintains the rings’ stability and makes them easy to see from outside the exhibit.
Feature Rings and Earrings in the Center
In the middle part, a hero ring or small set is shown using a middle ring block (about 75 × 53 mm). A display panel featuring six pairs of earrings and movable acrylic strip slots is located behind it. To enhance sight and lighting for various earring styles, this earring holder’s tilt angle may be adjusted.
Side Sections: Necklaces and Bracelets
Slim necklace display panels and arch-shaped bracelet stands are available on either side of the central modules of the N Series:
Bangles and bracelets are supported by bracelet arches with 60 × 30 mm pads that do not harm the metal or jewels.
The necklace panels, which measure about 75 by 210 mm each, have acrylic rod slots that allow you to change the height and angle, making them perfect for longer chains and shorter pendants.
Watches and hanging earrings in the rear row
The base’s rear part has higher components for timepieces and drop earrings:
Two 75 x 60 mm watch/bracelet blocks hold bangles or watch cushions in place.
Two tree-branch-style earring stands help provide vertical interest without obstructing the front modules’ view and offer additional space for hanging earrings.
Materials and Construction: – MDF core for strength and longevity in the base and modules
Surface: a smooth, matte finish, soft pink microfiber suede coating that preserves jewelry and adds color contrast; Style: recessed, low-profile design with a slightly tilted front for improved display effect
Benefits for Brands and Retailers:
– Expert jewelry display set that draws attention to the jewels rather than the props
– Quickly adaptable modular jewelry display design for new collections, sales, and seasons
– Ideal for trade fair presentations, jewelry window displays, jewelry countertop displays, or online store photo backdrops
– The hue pink microfibre complements diamonds, colored gemstones, silver, and gold jewelry, and more.
Details:
Product: N Series Pink Microfiber Modular Jewelry Display Set – Base size: about 450 x 420 mm (low profile, recessed)
Included were the following components:
Two 4×2 ring display trays; one 6-pair adjustable earring display panel; two bracelet arch supports with pads; and two necklace display panels with adjustable acrylic rods
Two-by-two-inch watch/bracelet displays
Two-by-two tree-branch earring displays
MDF is the core material; pink microfiber suede is the cover material.
Use: retail jewelry display, jewelry store showcase, jewelry window display, and brand presentation
Jewelry Display Set N
| Section | Module Type | Size (mm) | Description |
|---|---|---|---|
| Front Row | 4×2 Ring Display Trays × 2 sets | 206 × 100 | Holds 8 rings per tray, total 16 rings; low-position arrangement for visibility |
| Center Area | Earring Display Panel × 1 | 75 × 210 | Adjustable acrylic slot for tilt angle; displays 6 pairs of earrings |
| Center Feature | Middle Ring Block × 1 | 75 × 53 | Highlights feature or premium rings |
| Side Sections | Bracelet Arch Stands × 2 | 60 × 30 | Arched microfiber stands for bangles and bracelets |
| Necklace Display Panels × 2 | 75 × 210 | Adjustable acrylic rod slot; ideal for short or long chains | |
| Rear Section | Watch / Bracelet Blocks × 2 | 75 × 60 | Holds watches securely without damaging straps |
| Tree‑Branch Earring Stands × 2 | — | For hanging earrings, adds dimensional height |
| Feature | Description |
|---|---|
| Product Code | N Series Jewelry Display Set |
| Dimensions | 450 × 420 mm |
| Material | MDF + microfiber suede |
| Color | Soft pink |
| Components | 2 × 4×2 Ring Trays, 1 × Earring Display Panel, 1 × Middle Ring Block, 2 × Bracelet Arches, 2 × Necklace Panels, 2 × Watch Blocks, 2 × Branch Earring Stands |
| Display Style | Recessed, modular, low-profile |
| Suggested Use | Retail jewelry showcases, window displays, exhibitions, brand visuals |
Package:
Inner Case+Export Carton
The N Series Modular Jewelry Display Set from Winnerpak will add contemporary style and a polished appearance to your jewelry showroom. This luxurious pink microfiber display set, which is made of high-quality materials and is flexible, keeps your display neat and compact while enhancing the aesthetic appeal of fine jewelry collections.
Key Features: – Contemporary recessed base design for a sleek, low-profile look
Superior MDF construction encased with plush pink microfiber suede. Components can be adjusted to fit any display configuration thanks to the modular design. Ideal for trade show booths, window displays, exhibits, and retail jewelry showcases.
Components and Layout of the Display:
Front Section: Presentation of the Ring, up to 16 rings can be shown in two modular ring display trays (4 × 2 configuration, approximately 206 × 100 mm each). Because of their lowered position, the rings remain steady and exquisitely aligned, making them perfect for viewing from all perspectives.
Middle Section: Centerpiece Holder and Earring. Up to six pairs of earrings can be displayed on a single adjustable board with acrylic holes that tilt for the ideal viewing angle. For extra attention, your feature piece is highlighted by one raised middle ring block (about 75 × 53 mm).
Side Sections: Necklace and Bracelet Displays
Bangles and bracelets are softly cradled by two arch-style bracelet stands with padded microfiber rollers (60 × 30 mm). Two 75 x 210 mm necklace panels with movable acrylic rods allow for a variety of pendant or necklace hanging positions.
Rear Section: Watch and Hanging Earring Area: Two 75 × 60 mm watch/bracelet display blocks give wristwatches sturdy supports.
The back of the arrangement gains vertical depth and hanging capability from the addition of two tree-branch earring holders.
Craftsmanship and Material:
Core: Sturdy MDF foundation and framework
Surface: Pink microfiber suede that is delicate and resistant to scratches
Dimensions: recessed display height ~10 mm; overall base size 450 × 420 mm
Finish: A soft-touch surface that enhances the displayed pieces’ sheen and intricacy
Applications include:
✔ High-end jewelry stores and showrooms
✔ Retailers’ countertop jewelry displays
✔ Window display settings
✔ Product presentation at trade shows and exhibitions
✔ Expert photography and merchandising setups
Reasons for Selecting the N Series by Retailers:
striking modern design that improves brand perception
Materials to protect jewelry made of gold, silver, platinum, and gemstones
Multiple product varieties can be accommodated and setup time reduced with a modular layout.
In retail settings, dependable craftsmanship guarantees long-lasting use.
Frequently Asked Questions:
Q1: Is it possible to alter the jewelry display set’s color or fabric?
A1: Indeed.Velvet, linen, and leatherette are among the surface textures, colors, and textiles that can be customized.For available swatches, can refer to our product catagory content or get in touch with us.
Q2: Is the design entirely modular?
A2: Indeed.Depending on your product selection and display requirements, you can rearrange or change each display item, which is installed separately on the base panel.
Q3: What style of jewelry complements the N Series set the best?
A3: The N Series is perfect for complete jewelry collections because it can hold a variety of objects, including watches, necklaces, bracelets, earrings, and rings.
Q4: Is it simple to maintain the microfiber?
A4: Definitely.Just gently wipe the surface with a suede brush or a soft cloth free of lint.Steer clear of harsh chemicals and water.
Q5: Is it possible to add your business logo to bulk or wholesale orders?
A5: Indeed.For large orders, we offer OEM & ODM services like packaging coordination, brand color matching, and logo embossing.
Q6: What packaging does the item come in for shipping?
A6: To avoid scratches or deformation during transportation, every display set is safely wrapped in layers of protective foam padding. Export-safe boxes are used to package bulk orders.
Other popular microfiber jewellery display set collections:
Our certified quality management system delivers consistent, premium packaging solutions. Trust Winnerpak’s proven processes for your brand’s success.
Our sustainable packaging meets growing consumer demand for environmental responsibility. Premium quality with a conscience your customers will love
Winnerpak’s packaging passes comprehensive SGS testing for consumer safety and product integrity. Protect your brand with verified quality standards.
Improve Your Product Value Through our Packaging
7X16HX365Days. Yes, except for Sleeping Hours, we provide online service through Whatsapp/WeChat communication.
NO. 2206, Haizhu Xintiandi, 114th Industrial Avenue, Haizhu District, Guangzhou, 510250, P.R. China. (Near ShaYuan Subway Station B Exit, Line 8. )
Winner Industrial Zone, Wen Quan Road, Huoju developing area, ZhongShan, 528436， P.R.China ( 80km from the Downtown of Guangzhou)
Head Quarter: NO. 2206, Haizhu Xintiandi, .114th Industrial Avenue, Haizhu District, Guangzhou, 510250,P.R.China.
Showroom: NO.1503,Huangchao Tower,Natian Plaza,Tianhe District,Guangzhou,510623,P.R.China.
Phone: (+86)20-3825 -0800
Whatsapp: (+86)189 2273 8146
Email:winnerpak@winnerpak.com
Get notified about new packaging
Get notified about new articles
